Solar traffic signal is the development trend of modern transportation, with the country's promotion of low-carbon life, solar traffic signal is becoming more and more popular, compared with ordinary signals solar traffic signal is more environmentally friendly, energy-saving, due to the power storage function, in the installation does not need to lay the signal cable, you can effectively avoid the construction of power outages caused by the occurrence of other situations.
Solar traffic signal light consists of solar panels, battery packs, control system, LED display components, light pole 5 major components. Solar panels, battery packs are the core components of the signal light, to provide the signal light with normal work of the power supply. The control system has two kinds of wired control and wireless control, the LED display component consists of red, yellow and green high-brightness LEDs, and the light pole is generally eight-pronged or cylindrical spray galvanized.
Solar panels by the sunlight irradiation to generate electricity, through the controller to the battery charging, the controller has anti-reverse connection, anti-reverse charge, anti-overdischarge, anti-overcharge, overload and short-circuit auto-protection function, with automatic identification of day and night, voltage auto-detection, automatic protection of the battery, easy to install, non-polluting and so on. The battery is discharged by the controller to the signaling machine, transmitter, receiver, and signal lamp composition.
After adjusting the preset mode, the signal generator sends the signal to the transmitter, and the wireless signal generated by the transmitter is transmitted in an intermittent manner, and its transmitting frequency and intensity are in line with the relevant regulations of the State Radio Regulations Commission, which will not interfere with the wired and wireless devices around the use of the environment, and at the same time, ensure that the transmitted signal has a strong resistance to strong magnetic fields (high-voltage transmission lines, automobile sparks) interference capability. After receiving the wireless transmission signal, the receiver controls the light source of the signal lamp, realizing the red, yellow and green lamps work according to the preset mode, and when receiving the wireless transmission signal abnormally, it can realize the yellow flash function.
